Asus A8S-X - Manual (Page 51)

ASUS A8S-X 2-19
HyperTransport Configuration
HT Width [Auto]
HT Speed [800 MHz]
TRFC [Auto]
Sets the TRFC.
Configuration options: [Auto] [9T] [10T] [11T] [12T] [13T] [14T] [15T] [16T]
TRWT [Auto]
Sets the TRWT.
Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
Software Memory Hole [Disabled]
Enables or disables the software memory remapping around the memory hole.
Configuration options: [Disabled] [Enabled]
Hardware Memory Hole item appears instead of Software Memory Hole if
you installed a Revision E0 processor.
HyperTransport Configuration
HT Width [ Auto]
Allows selection of HyperTransport upstream data width.
Configuration options: [8 BIT] [16 BIT] [Auto]
HT Speed [800 MHz]
Sets the HyperTransport frequency from CPU to the NorthBridge.
Configuration options: [200 MHz] [400 Mhz] [800 Mhz] [1000 Mhz]