How to use – iPazzPort KP-810-22V User Manual
Page 3
5.How to use
English
5.2. Insert USB RECEIVER into USB port in the computer, the system will find new
hardware “wireless Audio HID Device” and will install driver automatically,
Turn unit on after driver installation successfully by switching power button
to on, LED and will flash one time then go out. That means your
keyboard and computer have built connection and they are paired.
5.3. Recharge your keyboard:
when your keyboard backlit flash without any operation that means
your keyboard is in low charge, and needs to recharge, Connect your
keyboard to your computer with mini end of USB cable to your
keyboard and another end to computer, then led will light up with
steady on, and go out when it is fully recharged, and LED will
light up
5.1. take USB Receiver out, Insert USB receiver into USB port on the computer
Take USB Receiver out
USB RECEIVER