iPazzPort KP-810-18V - Manual (Page 3)

How to use
2. Bottom view
2. Recharge your keyboard:
when your keyboard backlit flash without any operation that means your
keyboard is in low charge, and need to recharge connect your keyboard
to your computer with mini end of USB cable to your keyboard and another
end to computer, then led will light up with steady on, and go out when
it is fully recharged, and LED will light up
English
1.right view
3. Change battery:
3.press and push battery
cover downward 4. Take battery out
Battery cover
Battery
1. Insert USB RECEIVER into USB port in the computer, system will find new
hardware “wireless Audio HID Device” and will install driver automatically,
Turn unit on after driver installation successfully by switching power button
to on, LED and will flash one time then go out. That means your
keyboard and computer have been built connection.