Kinivo BTE40 Bluetooth Stereo Headphones EN - Manual (Page 7)

Kinivo BTE40 Stereo Bluetooth Earphones 7
Bluetooth, then select Scan for devices. Select the BTE40 to pair the earphones.
4. Bluetooth Multipoint Pairing
Bluetooth multipoint pairing allows you to connect up to two Bluetooth
capable devices simultaneously.
a. Follow the instructions in Bluetooth pairing section to pair the earphones
with the first Bluetooth device.
b. Repeat the same pairing procedure for the second Bluetooth device. The
first device will be disconnected temporarily.
c. The second Bluetooth device should now be connected. In the first
Bluetooth device’s menu, connect to the earphones. Both devices should
now be connected.
Note: The BTE40 earphones will only connect to one device automatically
on each power on. To use the second Bluetooth device, please connect using
Bluetooth configuration on that device.
5. To Pair with Windows 7 or Windows 8
a. Make sure your computer is Bluetooth enabled and supports Bluetooth
stereo (A2DP).
b. After putting the BTE40 earphones in pairing mode, right click the
Bluetooth tray icon then select ‘Add a Device’ from the context menu.
Under Windows 8, type ‘Add a Bluetooth device’.
c. Locate the BTE40 from the devices list and click the Next button.
d. After your computer has loaded the device and the drivers for the
earphones, you should see that the device has successfully connected.