Campbell Scientific 024A-L Met One Wind Direction Sensor - Manual (Page 9)

024A Met-One Wind Direction Sensor
7. Align the sensor so that the counter weight points to True South and
tighten the U-bolts on the CM220 or tighten the set screws on the NU-
RAIL fitting.
8. Connect the cable assembly to the sensor receptacle.
9. Route the sensor cable along the underside of the crossarm to the tripod or
tower, and to the instrument enclosure.
10. Secure the cable to the crossarm and tripod or tower using cable ties.
FIGURE 4-2. The 024A mounted to a crossarm via the 17953 NU-RAIL
3