Campbell Scientific 034B-L Met One Windset - Manual (Page 14)

Met One 034B Wind Set
5. Under the Available Sensors and Devices list, select the Sensors |
Meteorological | Wind Speed & Direction folder. Select
034A/034B Wind Speed & Direction Sensor. Click
to move the
selection to the Selected device window. The wind speed defaults to
meters/second. This can be changed by clicking the Wind Speed box
and selecting one of the other options.
6. After selecting the sensor, click at the left of the screen on Wiring
Diagram to see how the sensor is to be wired to the datalogger. The
wiring diagram can be printed out now or after more sensors are
added.
7. Select any other sensors you have, then finish the remaining Short Cut
steps to complete the program. The remaining steps are outlined in
Short Cut Help, which is accessed by clicking on Help | Contents |
Programming Steps.
6