Campbell Scientific BMP5 Direct SDK - Manual (Page 19)

Section 2. SimplePB.DLL Reference
return_data: Char – The location in memory where the data returned from the
datalogger exists.
return_data_len: Integer – Number of bytes in the data returned from the
datalogger.
Return Codes
0 = Successful.
1 = Success but more data to collect.
-1 = Communications timed out.
-2 = Port is not open.
Example of data returned by function call
"2005-09-08 14:13:47",1,"CR1000.Std.05","050624",47178
2.12 File_Send()
Send a program to the datalogger.
Syntax
File_Send(pakbus_address, device_type, file_name, return_data,
return_data_len)
Parameters
pakbus_address: Integer – The Pakbus address of the datalogger.
device_type: Integer – The type of datalogger:
• 1=CR200
• 2=CR10XPB, CR23XPB, CR510PB
• 3=CR1000
• 4=CR3000
• 5=CR800, CR850
file_name: String – The path and file name of the program to be sent.
return_data: Char – The location in memory where the data returned from the
datalogger exists.
return_data_len: Integer – Number of bytes in the data returned from the
datalogger.
2-9