Tables – Campbell Scientific CNR4 Net Radiometer User Manual
Page 7
Table of Contents
B-2. Attaching the CNF4 to CNR4 using pan-head screws and
washers .........................................................................................B-4
B-3. Making sure the cables are clear from the edges..............................B-5
B-4. CNF4 solar shield and four flat-head screws ...................................B-5
B-5. Attaching the solar shield to CNF4 using four flat-head screws ......B-6
B-6. Affixing the sensor label to CNF4 ...................................................B-6
B-7. Connecting the CNF4 power control cable and the mounting rod ...B-6
Tables
7-1. Resistance values versus CNR4’s thermistor temperature in °C........14
7–2. Resistance values versus CNR4’s Pt–100 temperature in °C.............16
7-3. Datalogger Connections for Differential Measurement .....................20
7-4. Datalogger Connections for Single-Ended Measurement ..................20
A-1. Typical output signals of CNR4 under different meteorological
conditions. Explanation can be found in the text......................... A-1
B-1. CR1000 and CR3000 Datalogger Connections for Differential
Measurement with Heater/Ventilator Control ..............................B-7
C-1. Datalogger Connections for Differential Measurement with
iii