Campbell Scientific COM220 56k Phone Modem - Manual (Page 29)

Appendix A. Changing COM220 Settings
The COM220 can return several possible responses once
connected (each terminating in a carriage return):
“1” CONNECT
“5” CONNECT1200
“10” CONNECT2400
“13” CONNECT9600
“18” CONNECT4800
“20” CONNECT7200
“21” CONNECT12000
“25” CONNECT14400
Hence, to work with the COM220, the user must put in a
NULL string, or else the DialModem will fail unless, by
chance, it returns the specific string the user entered.
Therefore, it is highly recommended to use the “” string for
the connect string, unless the user is using some other
modem that he knows has a different response string than
those listed above.
A.4.3 P97 Instruction (for CR10X)
Instruction 97 is a Program Control instruction that makes the following types
of calls:
• Datalogger calls a computer to send data.
• Datalogger calls a voice phone using our voice-synthesized modem.
• Datalogger calls a remote datalogger to retrieve its input locations.
Instruction 97 has the following parameters:
• Parameter 1 — Modem/Baud Rate Codes
• Parameter 2 — Flag No. to Disable P97
• Parameter 3 — Call Time Limit (seconds)
• Parameter 4 — Seconds Before Fast Attempts
• Parameter 5 — Fast Attempts
• Parameter 6 — Minutes Before Slow Attempts
• Parameter 7 — Failure Location
• Parameter 8 — Callback ID
CAUTION
A-9