Campbell Scientific CS125 Present Weather Sensor - Manual (Page 41)

User Guide
33
Menu 1: The message output menu
For example, typing `2’ will toggle the units through the options `METRES’ and
`FEET’ and typing `4’ will allow the message interval to be entered.
Option (2) allows the User Alarms to be set, again by toggling through options or
changing values.
Menu 2: The user alarm menu
Menu 2: The user alarm menu. Sub menu 2: Alarm two activation level
(Option 6)
Option (3) is the calibration menu
Menu 3: The calibration menu
CS125 ALARM - MENU 2
ID 0
S/N 1009
(1) Toggle user alarm one: DISABLED
(2) Toggle alarm one threshold: LESS THAN
(3) Set new user alarm one activation point: 10000 m
(4) Toggle user alarm two: DISABLED
(5) Toggle alarm two threshold: LESS THAN
(6) Set new user alarm two activation point: 10000 m
(9) Refresh
(0) Return to main menu
->
CS125 CALIBRATION - MENU 3
ID 0
S/N 1003
(1) Perform calibration
(2) Restore the factory calibration
(3) Perform dirty windows zero offset calibration
(4) Restore dirty windows factory calibration
(9) Refresh
(0) Return to main menu
->
CS125 MESSAGE - MENU 1
ID 0
S/N 1009
(1) Toggle message format:FULL
(2) Toggle units:METRES
(3) Toggle polled or continuous mode:CONTINUOUS
(4) Set continuous mode output interval:6 second(s)
(5) Toggle output averaging period: 1 minute(s)
(6) Sampling interval:1 second(s)
(9) Refresh
(0) Return to main menu
->