Campbell Scientific CS505 Fuel Moisture Sensor - Manual (Page 7)

CS505 Fuel Moisture Sensor
The mounting stake ships with a package of 12 ultraviolet light resistant cable
ties. The mounting stake has five holes punched along the edge of the shaft.
There are two pairs of holes higher and one single hole lower on the shaft.
When the stake is inserted into the ground to a depth level with the lower hole,
the probes are at 12 inches or about 30 centimeters above the ground surface.
The two upper pairs of holes are used to attach two tie wraps per cable—one
pair for both the CS505 and CS205/107.
FIGURE 3-1. Exploded View of CS505 and CS205 Mounting
FIGURE 3-2. CS505 Installation Over Forest Floor, 30cm Over Duff Layer
3