2 start new test, 4 removing samples – Campbell Scientific DOT600 Roadbed Water Content Meter User Manual

Page 18

Advertising
background image

DOT600 Roadbed Water Content Meter

5.3.2 Start New Test

Select Measurement, select New Sample.

Press Enter to:

1. zero all temporary values
2. increment test #

5.4 Removing Samples

Remove the sample chamber completely from the enclosure.
Loosen the compression nut by turning the ratchet in a counter clockwise
direction.
Remove the compression cap.
Remove the sample chamber ring from the sample chamber base.
The sample can then be removed from the sample ring.

14

Advertising