Campbell Scientific GPS16-HVS Garmin GPS Receiver - Manual (Page 14)

Garmin 16-HVS GPS Receiver
Set up the software for the correct serial port, 1200 baud, 8 data bits, 1 stop bit
and no parity. Flow control should be off. Using the serial cable, connect the
Garmin16-HVS to the computer serial port. Power up the Garmin16-HVS.
The GPS antenna should have a clear view of the sky. Don’t expect the GPS
antenna to work indoors. The $GPGGA string should be displayed once a
second. Make sure the $GPGGA string is showing a valid GPS fix. A valid
GPS fix will display time, position and have a GPS quality number greater than
zero. Part number 17218, RJ45 to DB9 adapter, is needed to connect the
Garmin16-HVS to the computer serial cable.
8