Campbell Scientific ET107 Evapotranspiration Monitoring Station - Manual (Page 72)

ET107 Weather Station
FIGURE 2-51. Desiccant installation
3. ET Software
The ET107 comes with a default program, and typically does not
require additional programming (see Appendix D, Default
Programs).
A variety of different software packages are available to work with the ET107
station. This section introduces software packages that can be used with the
ET107 station. It is not the goal to fully explain capabilities of each package.
All software packages mentioned below come with extensive help files.
Contact Campbell Scientific with questions and support. All software includes
installation instructions.
Free software packages include Short Cut for Windows (SCWIN) for
programming the station and PC200W which is used to communicate with a
direct connect or short-haul modem station and collect data. PC200W software
cannot be used to communicate with stations on a phone modem. Both
packages can be downloaded from Campbell Scientific’s website
www.campbellsci.com .
NOTE
Desiccant
62