Campbell Scientific HydroSense II Support Software User Guide - Manual (Page 15)

Section 2. Quickstart
2.4 Download Data
If the HydroSense II has new measurement or zone data, notification will be
posted in the status area to the right of the Synchronise button.
To download new data, press the Synchronise button.
After the download is complete, the status area indicates that the measurements
and zones are now synchronized.
For more information on downloading data see SECTION 3.4 Synchronizing
with a Device (p. 3-6).
2.5 View Data
Downloading data from the HydroSense II will enable three tabs in the main
window that enable viewing HydroSense II data.
2.5.1 Data Viewing Tab
The Data tab displays a list of all measurements sorted by time of
measurement. Each row represents a single measurement and lists
• the zone a measurement is located within
• latitude and longitude of the measurement
• details of the parameters measured
2-3