Tables – Campbell Scientific IRGASON Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer User Manual

Page 9

Advertising
background image

Table of Contents

9-1. Proper location of the sonic top wick (left) and bottom wick

(right) .............................................................................................. 26

9-2. PN 28902 CSAT3 Sonic Wick Spares Kit contents ........................... 26

9-3. Proper location of the gas analyzer top wick (left) and bottom

wick (right) ..................................................................................... 28

9-4. The zero-and-span shroud mounted on the zero-and-span stand.

The top tube is the gas intake, the black cable is the temperature

thermistor, and the short bottom tube is the gas exhaust. ............... 30

9-5. ECMon zero-and-span window .......................................................... 31

9-6. Replacing the desiccant and CO2 scrubber bottles ............................ 33

A-1. Frequency and amplitude response of EC100 filter at various

bandwidths ................................................................................... A-2

A-2. Frequency response comparison of the EC100 10 Hz bandwidth

and a 50 ms moving average ....................................................... A-3

Tables

6-1. EC100 SDM Output to a Campbell Scientific CR1000, CR3000,

or CR5000 Datalogger .................................................................... 14

7-1. Factory Default Settings ..................................................................... 16

8-1. USB and RS-485 Output Elements .................................................... 23

8-2. Multipliers and Offsets for Analog Outputs ....................................... 25

9-1. Rain Wick Replacement Parts ............................................................ 27

10-1. Output Modes for EC100 Instruction ................................................. 35

10-2. Bits in the Sonic Diagnostic Flag ....................................................... 35

10-3. Bits in the Gas Diagnostic Flag .......................................................... 36

10-4. ConfigCmd Values for Setting and Retrieving Settings ..................... 38

A-1. Filter Time Delays for Various Bandwidths ................................... A-3

B-1. Table of Equation Variables and Constants ..................................... B-1

iii

Advertising