Campbell Scientific Sentek EasyAG Installation Guide v 3.0 - Manual (Page 2)

EasyAG ® Installation Guide
EasyAG
®
50
EasyAG
®
80
All rights reserved. No part of this document may be reproduced, transcribed, translated into any language
or transmitted in any form electronic or mechanical for any purpose whatsoever without the prior written
consent of Sentek Pty Ltd. All intellectual and property rights remain with Sentek Pty Ltd.
All information presented is subject to change without notice.
Names of programs and computer sy stems are registered trademarks of their respective companies.
© 2003 Sentek Pty Ltd
EasyAG Installation Guide for EasyAG 50 and EasyAG 80
All Rights Reserved.
EasyAG is a trademark of Sentek Pty Ltd which may be registered in certain jurisdictions. EasyAG and
aspects of the described installation technique are protected internationally by various patents (and/or
patents pending).
Sentek Pty Ltd
77 Magill Road
Stepney, South Australia 5069
Phone: +61 8 8366 1900
Facsimile: +61 8 8362 8400
Internet:
www.sentek.com.au
Email: [email protected]