Campbell Scientific VisualWeather Software - Manual (Page 24)

VisualWeather
™
Software
desired for each bin. Any wind speeds that fall in between the low and high
will be placed in the corresponding bin. Any value below the low value of the
first bin will be placed in the calm bin. The default values give the lows and
highs that follow the Beaufort wind scale boundaries. If you have edited the
wind rose parameters, at any time you can restore the defaults for the bins by
clicking the Restore Defaults button.
If Automatically convert values for other units is checked, the values
entered will be converted and used for the other wind speed units
automatically.
The wind speed units used in reports are not those selected here.
The units used in reports will be those selected under Tools |
Options on the main screen. NOTE
14