Asus Motherboard P7P55D - Manual (Page 88)

3-26 Chapter 3: BIOS setup
Chapter 3
3.7.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[S1 (POS) only] Sets the APCI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the APCI suspend mode to S3/STR (Suspend To RAM).
[Auto] The system automatically configures the ACPI suspend mode.
3.7.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No]
The system will not invoke VGA BIOS POST on S3/STR resume.
[Yes] The system invokes VGA BIOS POST on S3/STR resume.
3.7.3 ACPI 2.0 Support [Disabled]
[Disabled] When set to [Disabled], the system will not add additional tables as per
ACPI 2.0 specifications.
[Enabled] When set to [Enabled], the system adds additional tables as per ACPI 2.0
specifications.
3.7.4 ACPI APIC Support [Enabled]
[Disabled] When set to [Disabled], the system disable the Advanced Configuration and
Power Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC).
[Enabled] When set to [Enabled], the ACPI APIC table pointer is included in the RSDT
pointer list.
3.7.5 EuP Ready [Disabled]
[Disabled] Disables the Energy Using Products (EuP) Ready function.
[Enabled] Allows the BIOS to switch off power for WOL, WO_USB, audio, and
onboard LEDs at S5 state to get the system ready for the EuP requirement.