Samsung PS50A451P1 - Manual (Page 20)

English - 0
Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
 Press the ENTER button to select Picture.
 Press the ▲ or ▼ button to select Picture Options, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
 Press the EXIT button to exit.
➢ In PC mode, you can only make changes to the Color Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
 Colour Tone: Cool/Cool1/Normal/Warm1/Warm
➢ When the picture mode is set to Dynamic or Standard,
Warm1 and Warm cannot be selected.
 Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
− Auto Wide: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
− 1:: Sets the picture to 16:9 wide mode.
− Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the by pressing the ► or ENTER button.
− Zoom: Magnify the size of the picture vertically on screen.
− 4:: Sets the picture to 4: normal mode.
− Just Scan: Use the function to see the full image without
any cutoff when HDMI (720p/1080i), or Component (1080i)
signals are input.
After selecting Just Scan in HDMI (100i) or Component
(100i) mode:
Press the ◄ or ► button to select , then press the ENTER button.
Press the ▲, ▼, ◄ or ► button to move the picture up, down, left and right.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize
the setting.
➢ With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
➢ For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
➢ You can change the picture size simply by pressing the P.SIZE button on the remote control.
➢ Depending on the input source, the picture size options may vary.
➢ The items available may differ depending on the selected mode.
➢ Auto Wide function is available only in TV, Ext.1, Ext., AV, and S-Video mode.
➢ Settings can be adjusted and stored for each external device you have connected to an input of the
TV.
➢ In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Positioning and Sizing the screen using Zoom

Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down
direction using the ▲ or ▼ button as well as the screen size.
 Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ◄ or ►
button.
 Resize the screen vertically using the ▲ or ▼ button after selecting the by pressing the ◄ or ►
button.
Continued...
Move Enter Return
Colour Tone : Normal 
Size : Auto Wide 
Screen Mode : 1: 
Digital NR : Auto 
Real 100 Hz Demo : Off 
DNle : Off 
HDMI Black Level : Normal 
Blue only mode : Off 
Screen Burn Protection 
Picture Options T V
Move Enter Return
Mode : Standard 
Cell Light 
Contrast 0
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings 
Picture Options 
Reset : OK 
Picture T V
Move Enter Return
Auto Wide
1:
Wide Zoom
Zoom
4:
Just Scan
Size T V
BN68-01417A-00.indb 20 2008-4-2 17:39:06