ARRI LOCPRO 35 - Manual (Page 10)

10
The LOCPRO 35 must stand on a solid flat
surface and should be disconnected from the
mains before it is moved.
Lift the LOCPRO 35 out off its shipping case and set it up
in such a way that the air vents on the bottom of the lamp
cooling fan
➪ photo are not obstructed. Observe the
clearances on the top and sides, see ➪ photo page 9.
Keep all flammable materials away from the
exit vents of the lamp fan.
Do not cover up the HTI ventilation ducts.
Unpacking and Installation