AT&T 915 - Manual (Page 15)

12
Store a pause in a memory
number
Press and release REDIAL/PAUSE once
to store a three to four second pause in
the dialing sequence. Each additional press
will add another three to four second pause.
NOTE: Each three to four second pause
counts as one digit when storing
numbers in telephone memory.
Dial a number in
one-touch memory
To dial a number stored in memory
locations , or :
1.
Lift the handset and wait for a
dial tone.
2.
Press the memory button ( ,
or ) where the number is
stored. The number is dialed
automatically.
Dial a number in
two-touch memory
To dial a number stored in a two-touch
memory location (
0 - 9 ):
1.
Lift the handset and wait for a
dial tone.
2.
Press and release MEM, then press
the memory button ( 0 - 9 ) where
the number is stored. The number
is dialed automatically.
Erase a memory number
To erase a memory location, store a
different telephone number in the same
location.
Telephone memory Telephone memory