Samsung PS50C550G1W User Manual
Page 7
7
01
Getting
Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo Mode is for retail
environments.
y
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
MENU
for 5 sec.
3
Selecting a country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country. If the desired country does not exist on the menu, select
Others.
4
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select Air or Cable.
5
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel
→ Auto Store (p. 13).
✎
Press the
ENTER
E button at any time to interrupt the memorisation process.
6
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Press the
▲ or ▼ button to select Auto, then press the
ENTER
E button.
7
Time Zone
Press the
▲ or ▼ button to select the your time zone, then press the
ENTER
E button.
(depending on the country)
8
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
9
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
Power Input
ANT OUT
1 (DVI)
1
(DV
I)
VHF/UHF Antenna
or
Cable
[PC550_E-Euro]BN68-02578E-00L10.indb 7
2010-03-13 오전 12:12:54