Asus DELUXE P4R800-V - Manual (Page 118)

5-20 Chapter 5: Software support
2. Press <2>, then <Enter> to select Stripe (RAID 0).
3. Press <1>, <7>, then <Enter> to select the Block Size.
4. Press <1>, <2>, then <Enter> to select the Transfer Mode.
5. Use the <Up> or <Down> arrow keys to move the selection bar, then
press <Enter> to select a disk drive.
6. Press N then <Enter> to create a stripe (RAID 0) configuration.
Press Y if you wish to split the data on the source disk to other disks.