Service and adjustments – Agri-Fab 45-03085 User Manual
Page 10
10
TO REPLACE V-BELT
WARNING: Shut off (disengage) the Tine
Clutch Lever, the Tiller Engine and the Tractor
Engine before making any repairs.
Replace V-belt if it has been damaged considerably from
slipping under heavy loads or if it show cracks or frayed
edges. Refer to figures 12 and 13.
IMPORTANT: Do not move or remove the belt guide.
If the position of the belt guide is accidentally altered,
return it to the correct setting (6-1/2" above the tine shield
support plate).
Remove the screw from the top of the belt guard.
•
Remove the hex nut from the rear of the guard.
•
Remove the belt guard to allow access to drive belt.
•
Disengage tine clutch lever and remove belt.
•
Reverse above procedures for installation of new belt.
•
SERVICE AND ADJUSTMENTS
FiGURE 12
FiGURE 13