Audiovox LCMR6CT - Manual (Page 11)

E: “MAP” Button (optional Navigation System required)
Each time the “MAP” button is pressed, the navigation display will toggle
between Map, Icon only and split screen while in navigation mode.
Note: Will only operate when the Navigation System remote control is
removed from the cradle.
F: “-” Button (optional Navigation System required)
Incrementally decrease volume level of the navigation voice command when
pressed.
Note: Will only operate when the Navigation System remote control is
removed from the cradle.
G: Internal Speaker
H: LCD Brightness Control
I: Internal Infra-RED Receiver for use with Navigation System Remote Control.
J: Power LED (Red when Power is on)
K: Display Timer Slide Control Switch: (optional Navigation System required)
Refer to # 3 below for detailed operation notes.
L : “T/C” Button
The temperature/compass button switches between Fahrenheit and Celsius
settings and also turns the display on or off. Press once to turn on the
continuous temperature (F)/compass display. Press again to switch the
temperature display to Celsius. Next press will turn off the
Temperaure/Compass display
M: Internal Speaker Switch (optional Navigation System required): Use to turn
the internal Speaker on/off. Remove the L-Cover at the left end of the mirror
using a Mini screwdriver (see Figure4), to gain access to the small switch inside.
To disable the internal speaker, set the switch to the off position (See Figure5).
Set the switch to the ON position to enable the internal speaker (see Figure5).
10