Airlink101 AR504 - Manual (Page 6)

Step 3 Click on Wizard from the main menu to open the Setup Wizard.
Step 4 Click Next to begin the Setup Wizard.
Step 5 Select your WAN Type (Internet Connection Type) and click Next. If you are not sure what your
Internet Connection Type is, please contact your Internet Service Provider (ISP) for assistance.
Static IP
If your ISP provided you with a static IP address, select ISP assigns you a static IP address (Static IP
Address) and click Next. Proceed to
Step 6, Static IP .
Cable Modem
If you use cable modem, select Obtain an IP address from ISP automatically (Dynamic IP Address)
and click Next. Proceed to
Step 6, Cable Modem .
Road Runner
If your ISP is running Road Runner Session Management, select Dynamic IP Address with Road
Runner Session Management (e.g. Telstra BigPond) and click Next. Proceed to
Step 6, Road
Runner .
DSL
If you use DSL, select Some ISPs require the use of PPPoE to connect to their services (PPP
over Ethernet) and click Next. Proceed to
Step 6, DSL .
PPTP
If you use PPTP, select Some ISPs require the use of PPTP to connect to their services (PPTP)
and click Next. Proceed to
Step 6, PPTP .
L2TP
If you use L2TP, select Some ISPs require the use of L2TP to connect to their services (L2TP) and
click Next. Proceed to
Step 6, L2TP .