American Audio M822FX - Manual (Page 23)

© American Audio ® - www.americanaudio.us - M822FX Instruction Manual Page 23
M822FX SPECiFiCaTiONS
Model: M822FX
POwER SUPPLY:
AC 115v~60Hz/230v~50Hz
Single Voltage:
AC 100V, 50/60Hz (Japan); AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada); AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina); AC 240V, 50Hz (Australia)
AC 220V, 60Hz (Philippines and korea)
AC 230V, 50Hz (Europe, U.k., New Zealand, South Africa, and Singapore)
DImENSIONS: 295mm (W) x 249mm (D) x 75mm (H)
16.5” (W) x 12.9” (D) x 3.54” (H)
wEIGHT: 6.17 Lbs. / 2.8 kgs.
POwER CONSUmPTION: 36W
OPERATING TEmPERATURE: 5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
mAXImUm OUTPUT LEVEL (0.5% T.H.D. AT 1kHz): +26db (Main L/R), +20db (ALT 3/4, Aux/EFX, & Control Room)
+20dB (Insert), More than 100mW (Headphones) @ 33Ω
FREQUENCY RESPONSE: 20Hz ~ 20kHz, +1/-2db (Mix L/R, Aux/EFX Send, &
Control Room)
T.H.D. (Total Harmonic Distortion): <0.1% @ +14db 20Hz ~ 20kHz (Mix L/R, Aux/EFX Send, &
Control Room)
mAXImUm VOLTAGE GAIN:
MiC iN to MaiN L/R: 74db
MiC iN to aUX: 66db
MiC iN to EFX (REv): 76db
MiC iN to CONTROL ROOM L/R: 80db
MiC iN to REC L/R: 52.2db
LiNE iN to MaiN L/R: 54db
LiNE iN to aUX: 46db
LiNE iN to EFX (REv): 56db
LiNE iN to CONTROL ROOM L/R: 60db
STEREO iN to MaiN L/R: 44db
aUX RETURN iN to MaiN L/R: 16db
TaPE iN to MaiN L/R: 20db
HUM AND NOISE [(AVERAGE RS = 150Ω) (Master Fader At Nominal Level & All Channel Faders At Minimum)]:
MiX L/R, aUX/EFX SENd, CONTROL ROOM OUT:
-127db Equivalent Input Noise, -95db Residual Noise
MiX L/R, aUX/EFX SENd, CONTROL ROOM OUT: -88db
CHANNEL INDICATORS:
PEak: An indicator for each channel turns on when the pre-channel fader signal is 5db below clipping.
INTERNAL DIGITAL EFFECT:
100 Selectable Presets/Foot Switch Controlable
NPUT CHANNEL EQ:
HiGH:
12kHz Shelving
Mid: 2.5kHz Peeking
LOW: 80Hz Shelving
TURNOvER/ROLL OFF FREQUENCiES: Located 3db below Maximum boost/Cut