Night Guard Home Surveillance System RS-725LCD - Manual (Page 11)

11
-
Passive Arming By-pass While the system Disarmed.
Activate or Turn Off The Remote Start Press twice within 3 seconds.
+ Channel # 4 Timer Output (4) Optional
II Switching code For 2nd Car Operation. For regular remote transmitter
Only
B. LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
-
(C)
System’s Trigger Record
Check
Press within 3 seconds
- -
(C) System’s Status Check Press within 3 seconds
-
( ) Optional Driving Pager Press within 3 seconds
-
( ) Monitor Indoor Temperature Press within 3 seconds
-
( ) Daily Timer Start Press within 3 seconds
LCD screen lamp turns on
for 5 seconds.
Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
- + Switching code for 2nd / 1st
Car Operation Press within 3 seconds and Hold
and buttons together for 2
seconds
C. LED display:
LED Function LED Function
Off Disarmed Zone 1 / Warn-Away Trigger
Slow
Flash
Armed
2 flashes...
pause
Zone 2 / Trigger on Trunk/Hood
On (Solid) Valet Mode
5 flashes...
pause
Zone 5 / Trigger on Ignition
Switch
Pause On Password Lock-out
D. CHIRP INDICATORS: E. PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Defective Reminder 3 flashes Disarm / Triggered
4 chirps Disarm / Triggered 12 flashes Car Locator
6 chirps Car Locator Constant On Under Remote Start
F. ALARM OPERATING CONDITION:
Siren / Horn Parking Light LED Doors Starter Dome Light
1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable
2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking
Turns on for 30
-second
3. Trigger Alarming Flashes Slow Flash Disable Flashes