Asus E3746 - Manual (Page 107)

ROG Striker II Extreme / Striker II NSE 4-29
ROG Logo [Enabled]
If this item is set to [Enabled], the box labeled as Republic of Gamers on the
heatpipe assembly lights up when the system is on.
Configuration options: [Enabled] [Disabled]
LCD Poster Off [Enabled]
Allows you to enable or disable the LCD Poster.
Configuration options: [Disabled] [Enabled]
LCD Poster Backlight [Disabled]
Allows you to enable or disable the LCD Poster backlight after POST.
Configuration options: [Disabled] [Enabled]
LCD Poster Mode [Current Time]
Allows you to select the LCD Poster mode.
Configuration options: [Current Time] [User String]
RAID Enabled [Disabled]
Enables or disables the onboard RAID controller. When set to [Enabled], the
succeeding items become user-configurable.
Configuration options: [Disabled] [Enabled]
SATA1/2/3 Primary/Secondary RAID [Disabled]
Enables or disables the RAID function of the SATA drives. Configuration options:
[Disabled] [Enabled]
4.5.7 LCD Poster and Onboard LED Control
Select Menu
Item Specific Help
Set ROG Logo Enabled/
Disabled
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Onboard Device Configuration
ROG Logo [Enabled]
LCD Poster Off [Enabled]
LCD Poster Backlight [Disabled]
LCD Poster Mode [Current Time]
x LCD Poster String
Voltiminder LED [ON]
CPU Overclocking LED [ON]
CPU LED Selection [CPU Volt]
NB LED Selection [NB Volt]