Nilfisk-ALTO SMART Sweeper/Scrubber 692003 User Manual
Page 35
Advertising
AMERICAN-LINCOLN
1-35
SMART
REAR SQUEEGEE
TO BEGIN THE CLEANING OPERATION
1.
Select the operating mode
NORMAL = ESP
2.
Lower brushes to the desired position.
SCRUB DECK = NORMAL RANGE OR HEAVY
3.
Place the squeegee switch in the lower position.
SQUEEGEE BLADE = LOWER
4.
Move solution control knob to the desired setting and begin operation.
SCRUBBING THE AVERAGE FLOOR WITH LIGHT TO MEDIUM SOILAGE
In this operation, cleaning is accomplished in one pass, with simultaneous solution feed, scrubbing and dirty
water pick up. The rate of solution feed and the speed of travel required will vary with floor condition. This
knowledge will come with operator experience.
Figure 38
OPERATING INSTRUCTIONS
Advertising