Samsung SPH-P100ZKASPR - Manual (Page 157)

3B. Web and Data Services 145
Web a
n
d
Dat
a
2. Enter the Network SSID. This is the name of your
Wi-Fi network.
3. Tap the Security field and select a security option.
This must match the current security setting on
your target network.
4. If secured, you will also need to enter the wireless
password. The
show password option reveals the
password as you type it instead of showing only
asterisks (****).
5. Tap Save to store the new information and connect
to the Wi-Fi network.
To manually scan for a Wi-Fi network:
1. Press > and tap >
Wireless and network > Wi-Fi settings.
2. Press and tap Scan .
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Advanced Wi-Fi Settings Menu
From the advance Wi-Fi settings menu, press
and tap Advanced menu allows you to set up many of
your device’s Wi-Fi services, including:
ⅷ Setting your Wi-Fi sleep policy
ⅷ Viewing your device’s MAC Address
ⅷ Configuring use of either a DHCP or Static IP
To access the advanced Wi-Fi settings menu:
1. Press > and tap >
Wireless and network > Wi-Fi settings .
2. Press and tap Advanced .
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
SPH-P100.book Page 145 Saturday, February 5, 2011 3:00 PM