Samsung NP900X4D-A04US - Manual (Page 65)

64
Chapter 2.
Using the computer
Using the TPM Security Device
(Optional)
5
If the system automatically restarts, the PHYSICAL
PRESENCE SCREEN appears. Confi rm that Yes is selected
and press Enter.
PHYSICAL PRESENCE SCREEN
[ Yes ] [No]
TPM State has requested to change to
Clear
Do you want to accept it?
6
When the computer restarts automatically and the Samsung
logo screen appears, press the F2 key repeatedly.
7
Select the Security > TPM Confi guration > Change TPM
Status item and set the item to Enable and Activate.
Phoenix SecureCore Tiano Setup
TPM Configuration
TPM Support
Change TPM Status
Current TPM State
Security
[Enabled]
[
No Change ]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
8
Press the F10 key to save the changes. The computer
automatically restarts. Initialization of the TPM chip has been
completed.
Now, install the TPM program and register the TPM program.