Samsung SCH-A890ZSVXAR - Manual (Page 149)

Voice signal commands
141
Call a name or number
The Call command lets you dial a person by saying the name
you’ve stored for that person in your contact list or by saying
the telephone number’s digits, even if you have not saved the
number in contacts.
Voice dialing tips
• Voice dialing works best in quieter environments.
•
When pronouncing a name or number, speak at a
normal speed, and there is no need to pause between
digits.
•
The phone recognizes the digits one, two, three, four,
five, six, seven, eight, nine, zero, and oh (zero). It
doesn’t recognize numbers such as “one eight hundred”
for “1-800.” Instead, say “one eight zero zero,” or “one
eight oh oh.”
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the
digit “1.”
• If you are experiencing frequent problems with Voice
Dial recognizing your commands, try adapting it to your
voice, which greatly improves its accuracy. See
“Adapting digits” on page 143 for more information.
Dialing a name
1. Press and hold .
“ Say a Command ” appears in the display and is
pronounced through the speaker.
2. Say “ Call .”
The phone prompts, “ Say the name or number .”