Samsung LNT4042HX-XAA - Manual (Page 6)

English - 
1 audIo out
Connects to the audio input jacks on your Amplifier/
Home theater.
2
dIGItal audIo out (optICal)
Connects to a Digital Audio component.
3
pC In
Connects to the video and audio output jacks on your
PC.
4
hdmI In ,, /dVI In(hdmI) (audIo r/l)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI 1 IN terminal for a DVI connection to an external
device. You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the DVI IN
‘R-AUDIO-L’ terminal for audio.
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, yor must use the
HDMI IN 1 terminal.
The 23 and 26 inch models supports TV, AV1, AV2,
S-Video 1, S-Video 2, Component1, Component2, PC,
HDMI1 and HDMI2.
5 ant  In/ant  In
Connects to an antenna or cable TV system.
6 aV In  / aV In 
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIdEo
Connects an S-Video signal from a camcorder or VCR.
7 hEadphonE
Connects a set of external headphones for private
listening
8 SErVICE
Connector for software upgrades (see page 61).
9 ComponEnt In ,
Connects Component video/audio.
0
powEr Input
Connects the supplied power cord
!
Ex lInK (ln-t0h, ln-t6h)
Connect this to the jack on the optional
wall mount bracket. This will allow you to adjust the
TV viewing angle using your remote control.
( see page 65.)
@ KEnSInGton loCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
Viewing the Connection panel
rear panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
[Side panel Jacks]
BN68-01167A-Eng-00-0329.indd 4 2007-03-29 �� 7:52:21