Reconnect a headset or car kit, Disconnect or unpair from a bluetooth device – Samsung SPH-L710MBASPR User Manual

Page 220

Advertising

Tools and Calendar

207

4. Tap Scan. Your phone will start to scan for Bluetooth devices within range.

5. When you see the name of your headset displayed in the Bluetooth devices section, tap

the name. Your phone then automatically tries to pair with the headset.

6. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in
the Bluetooth devices section. When the Bluetooth headset or car kit is connected to your

phone,

(Bluetooth connected) displays in the status bar. Depending on the type of headset

or car kit you have connected, you can then start using the headset or car kit to listen to music
or make and receive phone calls.

Note: Due to different specifications and features of other Bluetooth-compatible devices,

display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.

1. Press

and tap Settings > Bluetooth.

2. If Bluetooth is not on, tap the on-off slider to turn it on.

3. Make sure that the headset is discoverable.

Tap the headset’s name in the Bluetooth devices section.

5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit

documentation to find the passcode.

6. If you still cannot reconnect to the headset or car kit, follow the instructions in

Disconnect

or Unpair From a Bluetooth Device

, and then follow the instructions in

Connect a