Samsung UN24H4500AFXZA - Manual (Page 100)

95
Setting the Time and Using the Timer
Setting the Current Time
MENU > System > Time > Clock
Try Now
Set the clock manually or automatically.
To view the time after the clock is set, press the
INFO
button on your remote.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU
>
System
>
Time
>
Clock
>
Clock Mode
Try Now
Set
Clock Mode
to
Auto
. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode...
MENU
>
System
>
Time
>
Clock
>
Time Offset
Try Now
If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as
much as -/+ 12 hours. Select
System
>
Time
>
Clock
>
Time Offset
, and then offset the clock to the
correct time.
" Time Offset adjusts the time through a network connection and is only available if the Clock Mode is set to
Auto and the TV is connected to the Internet though a local area network.
" Time Offset
adjusts the time if the TV fails to receive time information through normal digital broadcast
signals.