Samsung WAM751-ZA - Manual (Page 43)

A
Adding an M7
• Before adding an M7, unplug all M7s that are connected to the Samsung Multiroom app.
• If you add a new HUB and an extra M7 and connect them to the same wireless router
that an existing M7 is connected to, the existing M7 will disappear from the Samsung
Multiroom app. To re-connect the existing M7, connect it to the newly added HUB.
❚ Adding an extra M7 to a HUB that is connected to an M7
1 Press the SPK Add button on the back of the HUB.
(The Pairing indicator on the front of the HUB will blink.)
NOTE
9 The pairing indicator ( ) flashes during the pairing mode. You plug in M7 whille the indicator is
flashing.
2 Plug the M7 you are adding into an electrical outlet, and then press the SPK Add button
on the back of the M7.
When the M7 connects to the HUB, the M7 beeps or sounds, and the M7's LED
indicator stops flashing.
3 On your smart device, select the Samsung Multiroom app. Setup starts.
NOTE
9
After pairing is complete, the M7 naming screen appears. Edit the name or enter a name of your own
choosing.
43
4444