Samsung SMX-C10RN-XAC - Manual (Page 130)

116_English
Playback
Message Icon Informs that... Action
Read Error -
Some problems occurred during reading
data from storage media.
Format storage media using menus after
backing up important files to PC or another
storage device.
•
The Number of
video files is full.
Cannot copy videos.
-
Folder and files have reached capacity
and you can not record.
Format the storage media using the menu after
backing up important files to your PC or another
storage device. Set "FileNo." to "Reset."
•
The Number of
photo files is full.
Cannot copy photos.
(SMX-C13/C14 only)
-
Folder and files have reached their
capacity and you cannot take a picture.
Format storage media using the menu item after
backing up important files to your PC or another
storage device. Set "FileNo." to "Reset."
•
troubleshooting
When there is condensation, put aside for a while before using
What is condensation?
Condensation occurs when a camcorder is moved to a place where the temperature differs significantly from the
previous place. In other words, the water vapor in the air turns into dew because of the temperature difference,
and it condensates like dew on the external or internal lenses of the camcorder and on the reflection lens.
When this happens, you temporarily may not use the record or play functions of the camcorder. Also, it may
cause a malfunction or damage to the camcorder when using the device with the power on while there is
condensation.
What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.
When does condensation occur?
When the device is relocated to a place with a higher temperature than the previous location, or when using it in
a hot area suddenly.
- When recording outdoors in cold weather during the winter and then using it in indoors.
- When recording outdoors in hot weather after being indoors or inside a car where the air conditioner was
running.
Note before sending your camcorder for repair.
If these instructions do not solve your problem, contact your nearest Samsung authorised service center.
Depending on the problem, the camcorder's built-in memory (SMX-C13/SMX-C14 only) may need to be initialized
or replaced and the data will be deleted. Be sure to back up the data on the camcorder to other storage media
before sending your camcorder in for repair. Samsung cannot guarantee any loss of your data.
•
•
•
•
•
CAUTION