Audiovox GMRS-1535 - Manual (Page 15)

15
Key Tone
This feature allows the transceiver to sound a confirmation tone whenever
the following keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE
Button, SCAN Button, or the EMG Button.
To turn the key tones on or off,
- From GMRS standby mode, press the MODE Button six times until bp,
the Bell ( ) icon, and On or oF flash on the LCD display.
- Press the Up or Down Button to toggle the key tone feature On or Off.
- Press the Power On/Off button momentarily to confirm selection.
When the key tone feature is on, the Bell icon appears steady on the
display, and the beep tones sound in response to button activation.
Transmit Power Selection Mode
This feature permits selection of the transmitting power level to high
(1.8 watts)or low (0.5 watt). Using low power the unit will have a lower
transmit range but battery life will be increased.
To access the transmitter power selection function:
- From GMRS standby mode, press the MODE Button until the Po icon
appears with a flashing HI or Lo indication on the display.
- Press the Up or Down button to toggle between the High and Low se-
lections.
- Press the Power On/Off button momentarily to confirm selection.
The display will indicate the current setting in standby mode.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the
PTT button is released. This tone alerts the receiving party that the trans-
mission has been terminated intentionally.