Samsung UN55F8000BFXZA - Manual

BN68-05493A-02
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included with your TV
Remote Control Stand Parts and Cables
Smart Touch Control Power inlet cover Cable clip Safety strap
x 2
Batteries (AAA x 4) Wall mount adapter IR extender Power cord
RCA adapter x 2 Component adapter Base
x 2
x 8
Remote Control Leg Screws
Also included: User manual, 3D Active Glasses
Step 1
Attach the TV to
the Stand
Step 2
Connect video
devices
Step 3
Using the Smart
Touch Control
Step 4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A Open the package, and remove the top piece of
packing material, leaving the TV in the box.
1B
x 2
Leg Base Screws
x 8
✎ Accessories may be
located at different
positions, depending on
the model.
Assemble the stand first, before removing the TV
from the box. You will need the base, legs and
screws.
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
x4 (M4 X L12)
L
R
Fit the base and legs together, making sure that
the legs are correctly aligned with the base.
1D Insert 2 screws through the base into each leg as
shown, and then secure the legs to the base with
a screwdriver.
1E Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1F Holding the stand parallel to the screen, slide the
stand legs into the notches on the back of the TV.
1G
x4 (M4 X L12)
Insert 4 screws and secure the stand to the TV. 1H When placing the product on a console or shelf,
make sure that the stand does not protrude
beyond the edge of the console or shelf. This
may cause the product to fall off and result in a
malfunction or injury.
[UF8000_QSG]BN68-05493A-02ENG.indb 2 2013-10-29 �� 9:10:49