Samsung YH-925GS-XAP - Manual

Disconnecting the USB cable
6
After completing the file transmission, you must disconnect the cable in the following way:
Please close Music Studio and Multimedia Studio.
1
Double-click on the green arrow in the taskbar on the bottom right of the
window.
2
When the [ Stop a Hardware device ] message appears,
press the [OK] button and disconnect the USB cable.
Location of Controls
YH-925 Quick Guide
1
✻ Make sure the player is fully charged and the earphones are connected.
Power On: Press and hold the √» button to turn on the power.
Power Off: Press and hold the √» button to turn off the power.
Press the VOLUME up or down button to adjust the volume from 0 to 40.
Turning Power On and Off
Select Now Playing in the menu.
● Playback starts automatically.
Playing Music
Press the √» button to pause playback.
● While in Pause mode, briefly press √» again
to resume playback.
Pausing Music
Adjusting the Volume
Hold Feature
Playing music / Hold Feature
7
Use the Hold feature to lock and disable all buttons. The Hold feature is useful to
prevent your Samsung player from being accidentally turned off or on, or to ensure
uninterrupted playback.
Activate on the main unit.
● When you activate the HOLD switch, a " " appears on the display.
Troubleshooting
8
SEL MENU
LINE-IN MIC HOLD
REC
MIC
Hold switch
LINE IN jack
Skip/Search button
Skip/Search button
Record button
USB Cable Connection Port
Power On/Off
Play/Pause button
Volume UP/
Scroll UP button
Earphone jack
Volume DOWN/
Scroll DOWN button
Select button
Menu button
RESET Hole
Display
One of the messages below appears:
“The device firmware needs repairs. Please connect to PC and repair firmware with recovery
utility. Device will be turned off.” or “ The device database needs repairs. Please connect to PC
and rebuild database with recovery utility. Device will be turned off.”
The message "Loading" appears and the device does not operate when you turn on
the power.
File search does not work properly in the Menu Library.
● Refer to “Using Recovery Utilities”
The player doesn't work. There is nothing showing on the display panel.
● Reset the Player
● Connect the charger.
● Make sure the Hold switch is in the off position.
There is no sound even if I press the Play button in Music mode.
● Check if there are MP3 or WMA files on the player.
● Non-playable file formats (e.g. MPEG1 LAYER 1 file) cannot be played.
● Files that have been downloaded without using the Music Studio cannot be played.
I cannot download files.
● Check the battery's power level.
● Check if the driver is installed correctly on your PC.
Reinstall the software from the installation CD.
● Check the USB connection between the player and your PC.
● Check if there is the “unplug/eject” or “Safely Remove Hardware” icon located in your icon
tray at the bottom of your screen.
HOLD
N N N N o o o o tt tt e e e e
● Press and hold the SEL button in Now Playing mode while a file is playing to display the current Playlist.
● In the Playlist, use the SCROLL UP/SCROLL DOWN buttons to move to a track, and press the √»
button to play the selected track.