Samsung NP-RV520-W01US - Manual (Page 84)

82 83
Chapter 4.
Settings and Upgrade
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Carefully read and follow the precautions printed on the •
battery before using the battery.
Before using your computer for the first time after
•
purchasing it, charge the battery completely.
The images used for the illustration are of a representative
•
model, therefore the images may differ from the the actual
product.
Precautions
Use only chargers specified in the User Manual. •
Never heat the battery pack, put it near or in a fire or use at •
a temperature higher than 60°C, as this may cause fire.
Never cause a short circuit between the battery pack
•
terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the
•
battery and the safety instructions in the User Manual
before using the battery.
Please refer to the system operation environment of
•
this manual and operate and store the battery at room
temperature.
Charging the Battery
1
Attach the battery and connect the AC adapter to the DC-in
jack of the computer.
The battery will then start charging.
2
When charging is complete, the Charge LED turns green.
Status Charge LED
Charging Red
Charging complete Green
AC adapter not
connected
Off