Samsung SCH-R631LBAXAR - Manual (Page 77)

Tools 73
2. At the prompt, “Place device you are connecting to in
discoverable mode”, place the target device in discoverable
mode. (See the target device’s user manual for more
information.)
3. Tap OK. Your phone searches for discoverable devices and list
available devices appears in the display.
4. Tap the device you want to pair with your phone. Your phone
attempts to Autopair with the selected device.
5. Check your phone’s display, and the target device, to confirm
that the same passkey is displayed on both. If the passkey
matches, tap Yes on your phone and accept the prompt on the
target device.
Note: When pairing your phone with a Bluetooth device other than a headset or
headphones, the same passkey or PIN must be entered on both devices for
the pairing to succeed.
6. At the prompt “Before connecting to <target device>”, set the
incoming security for this device:
• Tap Always Ask to have your phone prompt for confirmation before
accepting pairing requests from this device.
• Tap Always Connect to allow automatic pairings from this device.
r631.book Page 73 Tuesday, June 1, 2010 2:57 PM