Samsung LTP326WX-XAC - Manual (Page 9)

8
3. Using the “MODE” Button in the Anynet System Mode
- When you press the “MODE” button on the remote control in the Anynet System mode
Note : Anynet Mode(TV, VCR, CATV, DVD, STB)
The Anynet System features are available only when you select “TV” mode
on the remote control.
Chapter 3.
Anynet Remote
Control
- When you switch to a mode other than TV mode
by pressing the “MODE” button.
- Disappears after three seconds.
- When you switch to TV mode by pressing the
“MODE” button.
- Disappears after three seconds.
BN68-00653H-00Eng.qxd 7/8/04 3:42 AM Page 8