Samsung DW80H9950US-AA - Manual (Page 6)

6_ installing the dishwasher
installing the dishwasher
Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you are not at risk of injury when washing dishes.
STEP 1 CHECK THE PARTS AND TOOLS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
2 Installation Brackets
2 Tox Flat Head Screws
(For the installation
bracket)
Drain Hose
Hose Clamp
(for Drain Hose)
Kick Plate
Hose Fixer
(for Drain Hose)
3 Screws
(for the kick plate &
Hose Fixer)
sound-absorber
(in front of Base)
(ON SOME MODELS)
Not provided
Power cable
Twist on wire
connector
Strain relief
Electrical tape &
Standard duct tape
Hot water supply line 90° Elbow( 3 /
8 ”) Tube fi ttings
Tefl on ® tape or sealing
compound
Hose clamp Air gap Rubber connector
2 Screws for the side
walls
[Length : 1" (25mm)]
For the hot water supply line – We strongly recommend using 3 /
8
” minimum O.D. copper tubing with a
compression fi tting or a fl exible stainless steel braided hot water supply line.
[Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside
the tube fi tting.]
You also need a 90° elbow with
3 /
8
” N.P.T. external pipe threads on one end and a fi tting sized to fi t
your hot water supply line (copper tubing/compression fi tting or braided hose) on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes
may require the cable to have a BX style metal jacket.
installation_DW80H9950US-00151A-02_EN_140811.indd Sec3:6 installation_DW80H9950US-00151A-02_EN_140811.indd Sec3:6 2014-08-11 7:39:28 2014-08-11 7:39:28