Samsung SGH-A767LBAATT User Manual
Page 35
Call Functions 31
•
End Call: Allows you to end the active call.
If you are in a call, you can place the active call on hold by
selecting the New Call option above and either dialing another
number or answering another incoming call. Once the second
call has been activated, the following options are available.
•
Swap: Places the active call on hold and then re-activates the call on
hold.
•
Join: Joins all of the calls you have established with your phone (both
active and on hold) into a multi-party call.
When you want to finish, end each call normally by pressing the
key.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1.
Dial the number and press
.
2.
Once the call is answered, press
to activate the
speakerphone.
3.
Use the Volume keys (located on the left side of your
phone) to adjust the volume.
Important!: For more information, see “Responsible Listening” on page 139.
Muting or Sending Keypad Tones
These options allow you to turn the key tones off or on. If the
Mute Keypad Tone option is selected, it allows you to press keys
without hearing key tones during a call.
Note: To communicate with answering machines or computerized telephone
systems, the Send Keypad Tone option must be selected.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
Example: You wish to say something to person in the room, but do not want
the person on the phone to hear you.
Note: If you are already in Video Share or you have a call on hold, you need to
select Mute/Unmute.
To switch the microphone off temporarily during a call:
1.
Press the Mute soft key. The option is then replaced with
Unmute.
2.
Press the Unmute soft key to deactivate the Mute function
and reactivate the microphone.