Playing back a tape reproducir una cinta – Samsung SC-L906-XAP User Manual

Page 54

Advertising
background image

ENGLISH

ESPAÑOL

54

Playing back a Tape

Reproducir una cinta

Notes:

■ SCL901/L903/L906/L907 feature a monaural audio system.

If your TV or VCR features a stereo audio system, connect
the audio cable to input “L” of your TV or VCR.

■ You can use an S-VIDEO cable to obtain better quality of

pictures if you have a S-VIDEO connector on your TV.

■ While playing back on a TV screen, close the LCD panel.

Otherwise, picture distortion may occur.

Playback

1.

Use the TV/VIDEO button to select VIDEO on your TV.

2.

Connect power source (battery or AC
Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.

3.

Insert a tape you want to see.

■ Make sure that STOP is displayed.

4.

Press the

(PLAY/STILL) button.

■ The picture you recorded appears on

the TV after 2 to 3 seconds.

■ Press ■ (STOP) to stop playing.

■ If the tape reaches its end during

playback, the tape will rewind
automatically.

Notes:

■ Vibration from the built-in speaker can cause picture

distortion.

■ It is best to turn the built-in speaker off when your

camcorder is connected to the TV.

■ The system (Hi8/8mm) is selected automatically,

depending on the tape format.

■ This camcorder does not support LP recording and

playback.

Notas:

■ SCL901/L903/L906/L907 disponen de un sistema de audio

monaural. Si su televisor o reproductor de vídeo disponen
de un sistema de audio estéreo, conecte el cable audio a
la entrada “L” del televisor o del reproductor de vídeo.

■ En caso de SCL901/L906/L907, puede utilizar el cable

S-VÍDEO para obtener imágenes de mejor calidad en
caso de disponer de un conector S-VÍDEO en el
televisor.

■ Mientras reproduce una cinta en la pantalla de un televisor,

debe ce-rrar el panel LCD. Si no lo hace, podrían aparecer
interferencias en la imagen.

Reproducción

1. Utilice el botón TV/VÍDEO para

seleccionar VÍDEO en su televisor.

2. Conecte la fuente de energía a la

videocámara (batería o Adaptador AC).
Coloque el interruptor de encendido en
el modo PLAYER.

3. Introduzca el videocasete que quiera ver.

■ Asegúrese de que aparece el

indicador STOP.

4. Pulse el botón

(PLAY/STILL).

■ La imagen filmada aparece en el

televisor transcurrridos 2 ó 3
segundos.

■ Pulse ■ (STOP) para detener la

reproducción.

■ Si la cinta se acaba durante la

reproducción, se rebobinará
automáticamente.

Notas:

■ La vibración del altavoz incorporado puede ocasionar

interfe-rencias en la imagen.

■ Es mejor desconectar el altavoz incorporado mientras la

videocámara está conectada al televisor.

■ El sistema (Hi8/8mm) se seleccionan automáticamente

dependiendo del formato de la cinta.

■ Esta camara no soporta los modos LP.

PLAYER

PLAY/STILL

00732C SCL901 USA+ESP(46-70) 1/14/04 8:38 AM Page 54

Advertising
This manual is related to the following products: