Samsung SCX-4720F-XIP - Manual (Page 169)

F
AXING
(SCX-4720F/4720FS O
NLY
) 7.30
5
Enter the number of the receiving machine using the
number keypad.
You can use one-touch keypad, speed dial, or group dial
numbers. For details, see “Automatic Dialing” on page 7.19.
6 Press Enter to confirm the number on the display. The
display asks you to enter another fax number to which to
send the document.
N OTE : The Another No. prompt does not appear if you have added
numbers for another broadcast or delay fax job. You must wait
until the job is completed.
7
To enter more fax numbers, press 1 to select “Yes” and
repeat steps 5 and 6. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another
fax number.
8 When you finish entering fax numbers, press 2 to select
“No
” at the Another No. prompt.
The display asks you to enter a name.
9 To assign a name to the transmission, enter the name you
want. For details about entering characters, see page 2.17.
If you do not want to assign a name, skip this step.
10 Press Enter. The display shows the current time and asks
you to enter the starting time when the fax is to be sent.
11 Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
If you set a time earlier than the current time, the
document will be sent at that time on the following day.
12 Press Enter when the starting time displays correctly.