Samsung ML-3471ND-XAR - Manual (Page 47)

Devices_ 47
Scan
ITEM OPTION&DESCRIPTION
General • Scanner Enabled : You can set the scanner device usage. If you enable this option,
the system will allow use of a scanner device. If you disable this option, the system will
not allow use of a scanner device or any scan function. Set the option and click Add.
• Scan Default Original Type : You can set the default value for original type feature on
the scanner. Set the option and click Add.
• Scan Default Resolution : You can set the default resolution in dots-per-inch (DPI) on
the scanner. Set the option and click Add.
• Scan Default Color Mode : You can set the default color mode for the scanner. Set the
option and click Add.
• Scan Default File Format : You can set the default output image format for the
scanner. Set the option and click Add.
Scan to Email • Scan to Email Enabled : You can set the Scan to Email usage. If you enable this
option, the system will support Scan to Email services.
Scan to FTP • Scan to FTP Enabled : You can set the Scan to FTP usage. If you enable this option,
the system will support Scan to FTP services. Set the option and click Add.
• Scan to FTP Default Original Type : Set the option and click Add.
• Scan to FTP Default Scan Resolution : Set the option and click Add.
• Scan to FTP Default File Format : Set the option and click Add.
• Scan to FTP Default Scan Color : Set the option and click Add.
Scan to FTP Servers • You can configure FTP servers by uploading a CSV file. You can download the CSV file
from SWS and reuse the file for this configuration. Set the option and click Add.
Scan to SMB • Scan to SMB Enabled : You can set the Scan to SMB usage. If you enable this option,
the system will support Scan to SMB services. Set the option and click Add.
• Scan to SMB Default Original Type : Set the option and click Add.
• Scan to SMB Default Scan Resolution : Set the option and click Add.
• Scan to SMB Default File Format : Set the option and click Add.
• Scan to SMB Default Scan Color : Set the option and click Add.
Scan to SMB Severs • You can configure SMB servers by uploading a CSV file. You can download the CSV file
from SWS and reuse the file for this configuration. Set the option and click Add.